小区档车杆 蓝牙卡:433M收发模块一套+STC15F104+SOP8板+旧手机电池，全完事8元钱左右!
2019年01月25日 点击:
编辑: ztb096001
[backcolor=#ffffff]单片机源程序如下:[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]// 我刚会点亮单个发光管，其它什么都不会，大家不要笑我的代码啊，哈哈哈哈 [/backcolor]
[backcolor=#ffffff]/* [/backcolor]
[backcolor=#ffffff]新手参考测试 11.0592MHZ STC15F104W STC15W204S STC15F2K61S2（仅单个芯片+pcb裸板，无任何其它电子原件！）[/backcolor]
[backcolor=#ffffff]日期：20190124 ver 0.001 test OK[/backcolor]
[backcolor=#ffffff]STC-ISP V6.860 设置11.0592MHZ后，是11.0492MHZ--11.0692MHZ 之间，有误差小于3us左右[/backcolor]
[backcolor=#ffffff]*/[/backcolor]
[backcolor=#ffffff]#include <intrins.h> [/backcolor]
[backcolor=#ffffff]#include<STC15F2K60S2.H>[/backcolor]
[backcolor=#ffffff] //sbit ZTB30=P3^0;[/backcolor]
[backcolor=#ffffff] //sbit ZTB31=P3^1;[/backcolor]
[backcolor=#ffffff] //sbit ZTB32=P3^2;[/backcolor]
[backcolor=#ffffff] //sbit ZTB33=P3^3; [/backcolor]
[backcolor=#ffffff]sbit ZTB34=P3^4; // 批量 STC15F104 发射脚[/backcolor]
[backcolor=#ffffff]sbit ZTB54=P5^4; // 开发板 st15wc204 发射脚[/backcolor]
[backcolor=#ffffff]sbit ZTB55=P5^5; // 开发板 st15wc204 发射脚[/backcolor]
[backcolor=#ffffff]unsigned int K=1,i; // k=0,K=1, 433MHZ发射板 正负逻辑，原装0 模块1[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void HH() [/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] ZTB54=K;ZTB34=K; //高电屏[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void LL()[/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] ZTB54=!K;ZTB34=!K; //低电屏[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void A1() //高低电屏逻辑 A1 100us 100us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] HH();for(i=65;i>0;i--);[/backcolor]
[backcolor=#ffffff] LL();for(i=65;i>0;i--);[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void B1() //高低电屏逻辑 B1 200us 200us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] HH();for(i=130;i>0;i--);[/backcolor]
[backcolor=#ffffff] LL();for(i=130;i>0;i--);[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void C1() //高低电屏逻辑 C1 400us 400us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] HH();for(i=260;i>0;i--);[/backcolor]
[backcolor=#ffffff] LL();for(i=260;i>0;i--); [/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void D1() //高低电屏逻辑 D1 800us 800us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] HH();for(i=520;i>0;i--);[/backcolor]
[backcolor=#ffffff] LL();for(i=520;i>0;i--);[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void T3()[/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] HH(); for(i=65535;i>0;i--); // 100.572ms 11.0592 mhz [/backcolor]
[backcolor=#ffffff] LL(); for(i=65535;i>0;i--); // 100.572ms 11.0592 mhz [/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]void T4()[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] HH(); for(i=65162;i>0;i--); // 100ms 11.0592 mhz [/backcolor]
[backcolor=#ffffff] LL(); for(i=65109;i>0;i--); // 100ms 11.0592 mhz[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void main()[/backcolor]
[backcolor=#ffffff]{ [/backcolor]
[backcolor=#ffffff]ZTB55=0; //与GND短接，当电源地线用 ,（不想跳过此芯片脚:ant、 vcc、 p55+gnd 只焊并排三个脚） [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3(); //测试一下高低电屏平均误差时间<3us，[/backcolor]
[backcolor=#ffffff]A1();B1();C1();D1(); [/backcolor]
[backcolor=#ffffff]A1();A1();A1();A1();A1(); [/backcolor]
[backcolor=#ffffff]B1();B1();B1();B1();B1();[/backcolor]
[backcolor=#ffffff]C1();C1();C1();C1();C1();[/backcolor]
[backcolor=#ffffff]D1();D1();D1();D1();D1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]}[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]======================================================================================[/backcolor]
[backcolor=#ffffff]====================================================================================== [/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]/* 某小区档车杆 蓝牙卡 发射码 "ABCD" 循环 临时测试 (误差<3us)[/backcolor]
[backcolor=#ffffff] STC15F104W STC15W204S STC15F2K61S2[/backcolor]
[backcolor=#ffffff] 制作日期：20190114 ver 0.004 test[/backcolor]
[backcolor=#ffffff]淘宝 433收发模块一套+STC15F104+SOP8板+旧手机电池，全完事8元钱左右写好程序接上电就成了！[/backcolor]
[backcolor=#ffffff]*/[/backcolor]
[backcolor=#ffffff]#include <intrins.h> [/backcolor]
[backcolor=#ffffff]#include<STC15F2K60S2.H> [/backcolor]
[backcolor=#ffffff]sbit ZTB=P3^4; // 批量 STC15F104 发射脚[/backcolor]
[backcolor=#ffffff]sbit ZTB54=P5^4; // 开发板 st15wc204 发射脚[/backcolor]
[backcolor=#ffffff]sbit ZTB55=P5^5; // 开发板 st15wc204 发射脚[/backcolor]
[backcolor=#ffffff]unsigned int K=0,i; // k=0,K=1, 433MHZ发射板 正负逻辑，原装1 模块0[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void PP() [/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] ZTB54=K;ZTB=K;ZTB55=K ;[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff]void BB()[/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] ZTB54=!K;ZTB=!K;ZTB55=!K;[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void A1() //高低电屏逻辑 A 01 300us 300us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] PP();for(i=188;i>0;i--);[/backcolor]
[backcolor=#ffffff] BB();for(i=199;i>0;i--);[/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void B1() //高低低电屏逻辑 B 011 300us 700us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] PP();for(i=188;i>0;i--);[/backcolor]
[backcolor=#ffffff] BB();for(i=458;i>0;i--);[/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void C1() //高高低电屏逻辑 C 001 700us 300us[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] PP();for(i=455;i>0;i--);[/backcolor]
[backcolor=#ffffff] BB();for(i=199;i>0;i--);[/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff] } [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void D1() //高高低低电屏逻辑 D 0011 700us 700us[/backcolor]
[backcolor=#ffffff] { PP();for(i=455;i>0;i--);[/backcolor]
[backcolor=#ffffff] BB();for(i=458;i>0;i--);[/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]void T3()[/backcolor]
[backcolor=#ffffff] {[/backcolor]
[backcolor=#ffffff] PP(); for(i=65000;i>0;i--);[/backcolor]
[backcolor=#ffffff] A1(); for(i=66;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP(); for(i=31;i>0;i--); [/backcolor]
[backcolor=#ffffff] A1(); for(i=65;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP(); for(i=31;i>0;i--); [/backcolor]
[backcolor=#ffffff] B1(); for(i=136;i>0;i--);[/backcolor]
[backcolor=#ffffff] PP(); for(i=11400;i>0;i--);[/backcolor]
[backcolor=#ffffff] A1();[/backcolor]
[backcolor=#ffffff] PP(); for(i=8413;i>0;i--);[/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void T4()[/backcolor]
[backcolor=#ffffff] { [/backcolor]
[backcolor=#ffffff] PP(); for(i=1260;i>0;i--); [/backcolor]
[backcolor=#ffffff] BB(); for(i=302;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff] PP(); for(i=1260;i>0;i--); [/backcolor]
[backcolor=#ffffff] BB(); for(i=302;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff] PP(); for(i=1260;i>0;i--); [/backcolor]
[backcolor=#ffffff] BB(); for(i=302;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff] PP(); for(i=1260;i>0;i--); [/backcolor]
[backcolor=#ffffff] BB(); for(i=302;i>0;i--); [/backcolor]
[backcolor=#ffffff] PP();[/backcolor]
[backcolor=#ffffff] [/backcolor]
[backcolor=#ffffff] }[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]void main()[/backcolor]
[backcolor=#ffffff]{ [/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]C1();A1();A1();B1();[/backcolor]
[backcolor=#ffffff]C1();A1();C1();B1();[/backcolor]
[backcolor=#ffffff]C1();A1();C1();A1();[/backcolor]
[backcolor=#ffffff]A1();A1();A1();C1();[/backcolor]
[backcolor=#ffffff]C1();A1();A1();C1();[/backcolor]
[backcolor=#ffffff]C1();D1();D1();C1();[/backcolor]
[backcolor=#ffffff]C1();C1();B1();A1();[/backcolor]
[backcolor=#ffffff]A1();B1();C1();C1();[/backcolor]
[backcolor=#ffffff]A1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]A1();B1();A1();B1();[/backcolor]
[backcolor=#ffffff]A1();B1();C1();B1();[/backcolor]
[backcolor=#ffffff]A1();B1();C1();A1();[/backcolor]
[backcolor=#ffffff]C1();B1();A1();C1();[/backcolor]
[backcolor=#ffffff]A1();B1();A1();C1();[/backcolor]
[backcolor=#ffffff]A1();C1();D1();C1();[/backcolor]
[backcolor=#ffffff]A1();D1();B1();A1();[/backcolor]
[backcolor=#ffffff]C1();A1();C1();C1();[/backcolor]
[backcolor=#ffffff]C1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]D1();A1();A1();D1();[/backcolor]
[backcolor=#ffffff]D1();A1();C1();D1();[/backcolor]
[backcolor=#ffffff]D1();A1();C1();C1();[/backcolor]
[backcolor=#ffffff]B1();A1();A1();A1();[/backcolor]
[backcolor=#ffffff]D1();A1();A1();A1();[/backcolor]
[backcolor=#ffffff]D1();D1();D1();A1();[/backcolor]
[backcolor=#ffffff]D1();C1();B1();C1();[/backcolor]
[backcolor=#ffffff]B1();B1();C1();A1();[/backcolor]
[backcolor=#ffffff]A1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]A1();C1();A1();A1();[/backcolor]
[backcolor=#ffffff]A1();C1();C1();A1();[/backcolor]
[backcolor=#ffffff]A1();C1();C1();B1();[/backcolor]
[backcolor=#ffffff]C1();B1();D1();A1();[/backcolor]
[backcolor=#ffffff]C1();C1();A1();D1();[/backcolor]
[backcolor=#ffffff]A1();B1();A1();B1();[/backcolor]
[backcolor=#ffffff]A1();A1();B1();B1();[/backcolor]
[backcolor=#ffffff]C1();A1();C1();C1();[/backcolor]
[backcolor=#ffffff]A1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]D1();D1();C1();D1();[/backcolor]
[backcolor=#ffffff]D1();D1();A1();D1();[/backcolor]
[backcolor=#ffffff]D1();D1();A1();C1();[/backcolor]
[backcolor=#ffffff]B1();B1();C1();B1();[/backcolor]
[backcolor=#ffffff]A1();D1();C1();A1();[/backcolor]
[backcolor=#ffffff]D1();A1();D1();B1();[/backcolor]
[backcolor=#ffffff]B1();B1();D1();C1();[/backcolor]
[backcolor=#ffffff]A1();A1();C1();A1();[/backcolor]
[backcolor=#ffffff]A1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]T3();[/backcolor]
[backcolor=#ffffff]B1();C1();C1();D1();[/backcolor]
[backcolor=#ffffff]B1();C1();A1();D1();[/backcolor]
[backcolor=#ffffff]B1();C1();A1();C1();[/backcolor]
[backcolor=#ffffff]D1();A1();C1();B1();[/backcolor]
[backcolor=#ffffff]C1();C1();C1();A1();[/backcolor]
[backcolor=#ffffff]B1();B1();D1();B1();[/backcolor]
[backcolor=#ffffff]D1();A1();D1();C1();[/backcolor]
[backcolor=#ffffff]C1();B1();C1();A1();[/backcolor]
[backcolor=#ffffff]C1();[/backcolor]
[backcolor=#ffffff]T4();[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]
[/backcolor]
[backcolor=#ffffff]}[/backcolor]
相关文章
- · 单片机入门学习电子书（适合新手基础入门学习，仅共个人学习使用。） 2019-06-12
- · 有做MCU程序拆解的高手吗？ 2019-03-04
- · 大神看看这个是什么芯片，有图纸 2020-06-04
- · ST7565 串行液晶驱动 + 多层液晶菜单 + Proteus仿真 ST7565 串行液晶驱动 2020-12-14
- · 51单片机&5110液晶显示屏实现时间温度串口发送（附仿真截图） 2020-12-14
- · ATMEGA328P怎么读出数据 2020-11-24
- · 俺想自己DIY太阳能路灯，看下还需要什么备件？ 2021-01-24
- · 谁知道RT16X是什么单片机 2021-11-03
- · PIC16F1823怎么读写 2022-08-17